1. Substrate: Brickwork, Blockwork, Masonry

Existing substrate should be clean, dry and free of all loose coatings.

2. Levelling Coat

StoLevell In XXL

Synthetic spray-applied levelling plaster suitable for most interior substrates. Apply in 1-2 in thickness 3-5mm.

StoLevell In Fill

Fine gypsum levelling plaster. Application up to 30mm in a single application.

3. Intermediate Coat

StoPrep In

Filled, pigmented primer. Provides an adhesion bridge for synthetic plasters.

4. Reinforcement

Sto-RFP

Fibre-reinforced, lightweight, cement free reinforcing base coat.

Sto-Glass Fibre Mesh Fine

Flexible glass fibre mesh embedded in the reinforcing coat while wet to provide up to 15 times more crack resistance than conventional interior plasters.

5. Plaster finish

StoDecolit

Acrylic resin based interior plaster finish. Available in 4 grain sizes and in the full 800 colours of the StoColor System.

StoGranit

Acrylic resin based interior plaster finish with exposed natural stone aggregate. Available in 1.5mm grain size and 10 colour combinations.