Metallic effect facade paint
StoColor Metallic
An acrylate based facade paint with an attractive metallic finish, for use on a wide range of substrates, including masonry, brickwork and synthetic renders.
Features & Benefits
- StoColor Metallic provides a decorative, metallic satin sheen, available in 55 colours that change appearance under the effect of light.
- StoColor Metallic has been formulated to be a tough paint that will last for longer and withstand regular contact and heavy rainfall.
Material Properties
| Finish: |
Satin |
| Colour range: |
55 metallic colours |
| Pack size: |
5, 10, 15 ltr |
| Coats: |
2 coats + undercoat with StoColor Jumbosil |
| Consumption: |
Approx. 0.15 litres per m²
Consumption rate is dependent on substrate. |
| Application: |
Roller, brush or airless spray device |
Use & Restrictions
StoColor Metallic is not suitable for use on windows and doors, profiles and plinths or newly applied mineralic insulation systems such as StoTherm Mineral. No restrictions apply for EPS insulation systems such as StoTherm Classic.
The substrate must be properly prepared before painting with StoColor Metallic. After priming, paint a single undercoat of StoColor Jumbosil in a colour close to the desired finish and overpaint with 2 coats of StoColor Metallic.
For complete application instructions, please refer to the technical data sheet. Uses not clearly described in the technical data sheet should only take place after consultation with Sto.